Hamilton Regatta-alarm Manual De Instrucciones página 9

Synchronizationoftheinternalclock
The alarm time uses an internal clock that should be
synchronized with the analog time.
With the crown (E) pulled out to position (p ):
–
Press button (A) to synchronize the minutes ()
– Press button (B) to synchronize the hours ()
NB: the hands can be moved more rapidly by
maintaining pressure on the button for more than one
second.
Important: any modification of the analog time
necessitates re-synchronization of the internal clock
(alarm time).
Summer/Wintertime
Changeover of the internal clock to Summer/Winter
time.
With the crown (E) pulled out to position (p 2 ):
–
Press button (C) to change to Winter time.
–
Press button (D) to change to Summer time.
© HAMILTON 2006 / KHAKI REGATTA-ALARM
Timing
(up to 10 min.)
Start-Stop function
Timing a single event:
Press button (A): the chronograph starts. Press button
(A) again: the chronograph stops. Press button (B) to
reset to zero.
Cumulative time function
Timing successive events. Each result is added to the
previous one.
Press button (A): the chronograph starts. Press button
(A) again: the chronograph stops. Repeat these two
steps as many times as desired. At the end of the last
measurement, the chronograph displays the total of all
the times measured. Press button (B) to reset to zero.
Split-seconds function (intermediate times)
Successive times measured from the same starting
point.
Press button (A): the chronograph starts. Press button
(B) to read the fi rst intermediate time. Press button (B)
again. The chronograph hands catch up with the time
elapsed since the beginning of the measurement.
Repeat this procedure for each intermediate time. At
the end of the whole measurement, press button (A)
to read the total time. Press button (B) to reset to zero.
Flyback function
The fl yback function (also known as retour-en-vol or
instant restart) allows instant resetting of the counter
hands to zero to start a new measurement.
Press button (A): the chronograph starts. Press button
(C): the chronograph returns to zero and re-starts.
7