Pleasant Hearth OFW110R Manual Del Usuario página 6

ASSEMBLY INSTRUCTIONS
2. Assemble outer handle (E) by inserting the
male end of each outer handle (E) section into
the corresponding female end in order to make a
complete ring.
3. Place firebowl (F) on its side on a smooth,
clean surface. Attach one air vent (D) by inserting
two M6 x 15mm bolts (AA) through pre-drilled
holes in firebowl (F) and air vents (D) as illustrated.
Repeat with remaining air vents (D). Tighten all
bolts with a screwdriver.
Hardware Used
AA M6 x 15mm Bolt
4. Attach Leg (G) to the firebowl (F) by inserting M6
x 15mm bolts (AA) through pre-drilled holes in fire-
bowl (F) and leg (G) as illustrated. Tighten all bolts
with a screwdriver.
Hardware Used
AA M6 x 15mm Bolt
2
3
F
D
x 6
D
4
x 8
6
E
F
AA
G
AA
F
AA