PNI L807 PLUS Manual De Usuario página 6

Note: This device uses an integrated Li-Polymer battery that cannot be removed.
If the screen backlight is low and the battery is fully charged, then the device can
operate for up to 3 hours. Some functions such as file playback or intense backlight
consume more energy, which will obviously reduce battery life.
Power the device from the car lighter
Connect one end of the power cable to the miniUSB socket of the GPS
navigator.
Connect the other end of the cable to the lighter of the vehicle.
ATTENTION: To avoid possible damage caused by the unstable current when
starting the engine, we recommend that you connect the power adapter to the
lighter socket after starting the vehicle.
Turn the device on/off
Long press the button in the upper side of the device to turn the device on.
Press and hold this button again. In the popup-up window, choose one of the
options: Disconnected (the device shuts off completely) and Inactive (the
device goes into hibernation status). When you turn it back on, the device will
return to the operating mode used before hibernation.
Mount the windshield bracket
Attach the device to the windshield of the vehicle using the bracket included
in the package.
ATTENTION: make sure that the GPS navigator does not obstruct the
visibility of the driver and that it is well fixed. Do not place it in the air bag area.
Using a microSD memory card
If you want to play audio, video or image files on your GPS device, store the
desired files on a micro SD card. Insert the micro SD card into the dedicated
slot on the device.
User manual 6