Idiomas disponibles
Idiomas disponibles
LIFT CORPORATION Sht. 10 of 22 DSG#
11. Bolt on the pump cover as shown
in FIG. 10-1.
12. Reconnect power to the pump
by reconnecting positive (+)
cable to positive (+) battery
terminal (FIG. 10-2). Install and
tighten nut. Then, reconnect
negative (-) cable to negative
(-) battery terminal (FIG. 10-2).
Install and tighten nut.
13. Unfold platform. Then use standard
control switch to lower platform to
the ground (FIG. 10-3). Refer to GPT
Operation Manual for detailed oper-
ating instructions.
© MAXON Lift Corp. 2017
BOLTING PUMP COVER
POSITIVE (+)
BATTERY POST
NUT
NEGATIVE (-)
BATTERY CABLE
RECONNECTED BATTERY CABLES
PLATFORM UNFOLDED & LOWERED
M-15-16
Rev A Date: 06/19/17
FIG. 10-1
NEGATIVE (-)
BATTERY POST
FIG. 10-2
TO THE GROUND
FIG. 10-3
POSITIVE (+)
BATTERY CABLE
