Ct-400-Eur Signal Clamp (At-6030-Eur Kit) - Beha-Amprobe AT-6000-EUR Manual Del Usuario

2. KIT COMPONENTS
HIGH MODE: Short press on HI pushbutton turn on HIGH transmitting mode. Second short
press on HI button turn off transmitting.
LOW MODE: Short press on LO pushbutton turn on LOW transmitting mode. Second short
press on LO button turn off transmitting.
LOOP MODE: Long press >2s on HI pushbutton turn on LOOP mode. Long press on HI button
turn off LOOP mode.
2.3 CT-400-EUR Signal Clamp
(included with AT-6030-EUR / option for AT-6020-EUR)
The clamp accessory is used for applications when there is no access to the bare conductors.
The clamp attachment enables the AT-6000-TE Transmitter to induce a signal through the
insulation into either wires. The clamp works on low impedance closed circuits.
JAW
TACTILE
BARRIER
JAW
RELEASE
TEST LEAD
Figure 2.3a: Overview of CT-400-EUR Signal Clamp
11
CONNECTORS TO
TRANSMITTER