Kohler K-702400 Manual Del Usuario página 6

Wall
Jamb
A
4. Install the Bottom Track
Measure from left side stop to right side stop (dimension A). The bottom track fits between the
stops.
Mark dimension "A" on the bottom track with a pencil.
Cut the bottom track at the mark.
Taking care to avoid marring the finished surfaces, use a file to remove any burrs.
NOTE: When positioning the bottom track in the wall jambs, it helps to slide the back edge of the bottom
track in first, then gently twist the bottom track until the larger lip pops into position.
Insert the bottom track and check for proper fit. The larger lip of the bottom track should face
toward the outside of the shower. The ends of the bottom track should fit snugly against the front
protrusions in the wall jambs.
Remove the bottom track.
Apply silicone sealant in the groove at the bottom front edge of the bottom track.
Install the bottom track.
1036565-2-B
Apply sealant here.
Bottom Track
Wall Jamb
Bottom Track
Stop
A
Top View
Side View
Bottom Track
6
Bottom
Track
Kohler Co.