Clean The Spigot Parts; Clean The Filter Cartridge - Kohler Clarity Explore Instrucciones Y Cuidado

Clean the Spigot Parts

The spigot should be disassembled and cleaned once a week.
IMPORTANT! Use safe water to clean the spigot parts.
1. Empty the water from the lower container.
2. Remove the spigot from the lower container and unthread the handle.
3. Pull the seatcup from the spigot handle and scrub the threads with safe water.
4. Boil water for 2 minutes, then allow the water to sit for 2 minutes. Submerge
the spigot parts in the hot water for at least 5 minutes.
5. After drying, push the seatcup back onto the handle. Thread the handle back
onto the spigot and reconnect the spigot to the lower container.
1383737-2-B 8 Kohler Co.

Clean the Filter Cartridge

Over time, the filter cartidge pores will clog, reducing water flow. If the filter
cartridge no longer efficiently provides drinking water, clean the cartridge.
1. Remove the upper container. Place the lid on the lower container to protect
the safe water inside.
2. Pour out any remaining water from the upper container.
IMPORTANT! Do not use soap or boiling water.
NOTE: The filter cartridge must be removed for cleaning.
3. The filter should be flushed with clean, warm (not hot) water – i.e. under a tap
– for 15 minutes to reduce particulate buildup on the outer layer.
4. Inspect the filter cartridge for cracks or damage. A cracked cartridge will no
longer provide safe drinking water and must be replaced. Proceed to the
"Replace the Filter Cartridge" section.
Kohler Co. 9 1383737-2-B