Philips RI2800 Serie Manual Del Usuario página 15

Problem
The steam
boost function
does not work
properly.
Flakes and
impurities come
out of the
soleplate during
ironing.
The light on the
handle flashes
(RI2860 only).
4239.000.7100.1.indd 15
Cause
The iron is not hot
enough and/or the
drip-stop function
has been activated.
You have used the
steam boost
function too often
within a very
short period.
The iron is not hot
enough.
Hard water forms
flakes inside the
soleplate.
The automatic
shut-off function
has been activated
(see chapter
'Features', section
'Automatic shut-
off ').
EnglISh
Solution
Set an ironing temperature
that is suitable for steam
ironing ( 2 to MAX). Put the
iron on its heel and wait until
the temperature light goes out
before you start ironing.
Continue ironing in horizontal
position and wait a while
before you use the steam
boost function again.
Set an ironing temperature at
which the steam boost
function can be used ( 3
to MAX). Put the iron on its
heel and wait until the
temperature light goes out
before you use the steam
boost function.
Use the Calc-Clean function
one or more times (see
chapter 'Cleaning and
maintenance', section 'Calc-
Clean function').
Pick the iron up or move it
slightly to deactivate the
automatic shut-off function.
The automatic shut-off light
goes out.
15
15-12-09 16:53