First Use; Sensor Function; Charging; Led Charge Level Indicator - ANSMANN HD280RS Instrucciones De Servicio Originales

§ The operating instructions for devices to which the USB connection will be connec-
ted must also be read
§ Always keep the product dry
ATTENTION
§ Do not throw the product into a fire!
§ The product may only be charged in closed, dry and spacious rooms, away from
combustible materials and liquids. Disregard can result in burns and fires.
§ Never open, crush or heat a rechargeable battery or set it on fire.
§ Do not use the product in potentially explosive areas or in the rain and do not
expose it to excessive heat.
§ Do not use the product if it appears to be damaged

FIRST USE

The lamp is switched on/off with the on/off switch.
Press 1x: LED 30%
Press 2x: LED 100%
Press 3x: OFF

SENSOR FUNCTION

The sensor mode is activated by the sensor button.
Then the LED can be switched on and off with gesture control (distance ca. 10cm).

CHARGING

Charge the lamp fully before first use. Likewise, when storing over an extended
period of time, charge beforehand and charge at least 2x per year during storage
in order to prevent the rechargeable battery pack deep-discharging.
To charge the lamp unscrew the sealing cap. Connect the Micro-USB cable with
the lamp and then with a USB charger.

LED CHARGE LEVEL INDICATOR

The lamp has a professional LED charge level indicator
If the rechargeable battery is charging, the indicator LED illuminates red. If the
rechargeable battery is fully charged, the indicator LED illuminates green.
Deutsch |
12
Italiano | Nederlands | Dansk | Suomalainen | Norsk
English | Français | Español | Português | Svenska