Kohler K-99695 Manual De Instrucciones página 2

Ocultar thumbs Ver también para K-99695:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

IMPORTANT INSTRUCTIONS
READ AND SAVE FOR THE
WARNING: When using electrical products, basic
precautions should always be followed, including the
following:
WARNING: Risk of electric shock. Connect only to a circuit
protected by a Ground-Fault Circuit-Interrupter (GFCI)*.
Grounding is required. The unit should be installed and
grounded by a qualified service representative.
WARNING: Risk of electric shock. A qualified electrician
should route all electrical wiring.
WARNING: Risk of electric shock. Disconnect power before
servicing.
WARNING: Risk of injury or property damage. Please read
all instructions thoroughly before beginning installation.
NOTICE: Follow all plumbing, electrical, and building codes.
NOTICE: Provide generous, unrestricted service access to the
controller. Provide access for servicing. This access must be located
immediately next to the controller. Refer to the roughing-in
information.
*Outside North America, this device may be known as a Residual
Current Device (RCD).
Before Operating the System For the First Time:
Download and install the latest software for connected components.
This may take an hour or more to complete based on system
configuration and internet connection speed. Do not disconnect the
power from the controller during software download and
installation.
FCC and IC Compliance
This device complies with Part 15 of the FCC Rules and Industry
Canada license-exempt RSS standards(s). Operation is subject to the
following two conditions:
1218131-2-A
CONSUMER
2
Kohler Co.
Tabla de contenido
loading

Este manual también es adecuado para:

99695-e-na

Tabla de contenido