D936-937.book Page 15 Friday, August 30, 2002 10:24 AM
O
N A
When you are on the handset and want to transfer the call
to the base, press MENU / EXIT and select 2 for
This activates the intercom feature and places the caller on
hold. The Talk and Speaker lights are lit. Your voice will be
heard when you speak. The other person can take the call
by pressing SPEAKER (base). Once SPEAKER is pressed,
the handset goes idle. To participate in the call, press
TALK / END on the handset.
U
V
SING
OICEMAIL
If you subscribe to your local telephone company's Voicemail
Service, you can use your VOICEMAIL key to automatically
access your mailbox. (To setup your Voicemail, see "Vmail
Setup" on page 9.)
When your voicemail lights flash, or
displayed on the screen, press the VOICEMAIL key (handset
or base) to access your Voicemail.
C
V
LEARING THE
OICEMAIL
The Voicemail light may remain on after reviewing your
messages remotely, even when there are no messages. To
clear the light, press MENU / EXIT and then press 6 for
CLEAR VM LITE
to turn the light off.
CLEARED
is displayed.
C
ALL
INTERCOM
.
MESSAGE WAITING
is
L
IGHT
VOICE MAIL LIGHT
D936/D937 - 900MHz Cordless
U
C
W
ID (CWID) O
SING
ALL
AITING
When a new call comes in while you are talking, you will hear
a tone. The new caller's name and phone number, if
available, will be displayed. You can either alternate between
calls or disposition the call. Feature may not be available in
all areas. Contact your local phone company.
NEED TO KNOW
Caller ID, Call Waiting ID and CWID Options are required
from your local telephone company
local telephone company to activate these services.
A
B
LTERNATING
ETWEEN
When you receive a Call Waiting call and want to connect,
press FLASH. The active call will be placed on hold and the
new call will become active.
I
Press FLASH to alternate between calls.
I
Press TALK / END or SPEAKER to end the call.
USING THE D936/D937
PTIONS
.
Please contact your
C
ALLS
15