Steren COM-844 Manual De Instrucciones página 32

5. TROUBLESHOOTING
What can you do when
the computer with the
installed adapter is
not connected to the
wireless network or the
Internet?
-Check that indicators LED to the broadband MODEM is
indicating normal activity. If there is a problem with band
connection broadband.
-Check that the LED on the wireless router indicators are
functioning properly. If it is not, check that the power cord and
Ethernet cables are securely connected.
-Check that the IP address, subnet mask, gateway, and DNS
settings are correctly entered in the network.
In infrastructure mode, make sure that the SSID is specifi ed
in the settings for wireless visitors and access points.
In ad hoc mode, both wireless visitors will need to have the
same SSID. Please note that it will be necessary to confi gure
a client to establish a BSS (Basic service Set) (basic
service set) and wait briefl y before confi guring other visitors.
This prevents several visitors to try to establish a BSS at the
same time, which can result in a multiple BSS being established
a place of a single BSS with multiple associated visitors.
Check that the network connection for the wireless visitors
are properly confi gured.
If security is enabled, ensure that occurrences of the number
keys are entered both the adapter and the access point.
15 15