CARE AND MAINTENANCE
1. If this monitor is stored near freezing temperatures, allow it to return to room temperature before use.
2. If the monitor is not used for a long time, please be sure to fully charge it every month.
3. No monitor component needs to be maintained by the user. The circuit diagrams, component
part lists, descriptions, calibration instructions, or other information which will assist the user's
appropriately qualified technical personnel to repair those parts of the equipment which are
designated for repair can be supplied.
4. Clean the monitor with a dry, soft cloth or a moistened and well wrung soft cloth using water,
diluted disinfectant alcohol, or diluted detergent.
5. The monitor can maintain the safety and performance characteristics for a minimum of
10,000measurements or three years of usage, and the cuff integrity is maintained after 1,000
open-close cycles.
6. The battery can maintain the performance characteristics for a minimum of 300 charge cycles.
7. It is recommended that if the cuff is used in a hospital or a clinic, it be disinfected twice a week.
Wipe the inner side (the side that contacts skin) of the cuff with a soft cloth lightly moistened
with Ethyl alcohol (75-90%). Then air-dry the cuff.
8. It is recommended that product performance be checked every 2 years or after each repair.
Please contact the customer service.
9. The monitor requires 6 hours to warm from the minimum storage temperature between uses
15