Kobalt CSJ120KU Manual Del Usuario página 11

OPERATINg INSTRUCTIONS
1. Wear protective gloves when replacing the
saw blade. Contact with the saw blade can
lead to injuries. You can ONLY use the
t-shank blade type provided with saw.
The machine is equipped with a tool-free blade
holder (K). This makes easy and quick chang-
ing of the saw blade (N or O) possible without
any additional tools. Rotate the blade holder
(K) counterclockwise and hold in position.
Fully insert the blade into the blade holder slot
with blade teeth facing forward, then release
the blade holder (K), which will self-rotate and
clamp over the top of the blade.
Note: When using JIGSAW MODE, the blade
teeth face forward as shown.
2. To remove a blade, hold the blade and rotate
the blade holder ring (K) counterclockwise to
release the blade.
WARNINg: The blade may be spring
ejected so protect your eyes.
3. The blade provided with the saw can be placed
in the blade storage clip (I) located at both sides
of the saw. Slide the blade in or out from the
side to store in the blade storage clip.
1
2
3
11
K
N
or
O
K
N
or
O
I
kobalttools.com