Operating Instructions - Kobalt CSJ120KU Manual Del Usuario

OPERATINg INSTRUCTIONS

CHARgINg YOUR BATTERY PACk
WARNINg: The charger and battery pack are specifically designed to work together, so do not
attempt to use any other devices. NEvER insert or allow metallic objects into your charger or battery
pack connections because an electrical failure and hazard will occur.
• Your battery pack is UNCHARgED and you must charge once before use. When you charge the
new battery or one which has not been used for long periods of time, it may not reach full charge
until after you have discharged it fully in use and recharged it several times.
Note: Before using the tool, read the instruction book carefully.
1. Plug the charger (Q) into an appropriate outlet.
The light will be green. Insert the battery pack
(G) into the charger. The light will flash red to
indicate the charging process has started. On
completion of charge, the light will turn solid
green. The pack is now fully charged. Unplug
the charger and remove the battery pack.
WARNINg
When battery charge runs out after continuous
use or exposure to direct sunlight or heat,
allow time for the battery to cool down before
recharging to achieve the full charge.
2. After recharge, slide the battery pack (G)
into the battery port. A simple push and slight
pressure will be sufficient.
1
G
2
8
2
Q
kobalttools.com
G