BMP Lullaby Wax Manual Del Usario página 15

5. USE
5
5
5
6
min
5
3
MAINTAIN TEMPERATURE function
5.7 Press and hold button 5 for 10 seconds. The three red LEDs (6) flash
in sequence and the blue indicator (4) remains constantly lit.
The wax warmer is now in MAINTAIN TEMPERATURE mode, and
will keep the wax at the ideal temperature for use.
6
STANDBY function (see paragraph 3.3)
5.8 Press button 5 again to set the appliance to STANDBY mode. The
three red LEDs extinguish and the blue indicator (4) remains
constantly lit.
6
Setting the temperature
5.9 Press button 5
1 RED LED lit indicates the MINIMUM temperature setting
2 RED LEDs lit indicate the MEDIUM temperature setting
3 RED LEDs lit indicate the MAXIMUM temperature setting
3 RED LEDs off indicate STANDBY mode
med
5.10 The wax warmer switches off automatically after 4 hours of inactivity.
To reactivate, follow the instructions from paragraph 5.5.
IMPORTANT: The wax warmer may be set to MAINTAIN
TEMPERATURE mode at any time by pressing and holding button 5
for 10 seconds (see paragraph 5.7)
IMPORTANT: The melt temperature for the wax must be determined
by the beautician in relation to the type of wax and the intended
treatment.
IMPORTANT: The appliance will continue to maintain the set
temperature and will remain operating until the main switch (3) is
turned
4
Stand-by
to set the temperature of the wax as desired:
max
GB
Stand-by