Steren COM-817 Manual Del Usuario página 39

You can click the Enable All button to make all the entries effective, click
the Disable All button to make all the entries ineffective, click the Delete
All button to delete all the entries.
Click the Next button to go to the next page and click the Previous
button to return to the previous page.
For example: If you desire that the wireless station A with MAC address
00-0A-EB-00- 07-BE be able to access the AP, the wireless station B
with MAC address 00-0A-EB- 00-07-5F not be able to access the AP,
and the wireless station C with MAC address 00-0A-EB-00-07-8A
be able to access the AP when its WEP key is 0123456789ABC-
DEF0123456789, while all other wireless stations cannot access the
AP, you should confi gure the Wireless MAC Address Filtering list
following these steps:
1. Click the Enable button to enable this function.
2. Select the radio button: Deny the stations not specifi ed by any
enabled entries in the list to access for Filtering Rules.
3. Delete or disable all entries if there are any entries already.
4. Click Add New... button and enter the MAC address 00-0A-EB-00-
07-BE in the MAC Address fi eld, enter wireless station A in Description
fi eld, select Allow in the Privilege pull-down list and select Enabled in
Status pull-down list. Click the Save and the Return button.
5. Click the Add New... button and enter the MAC address 00-0A-EB-00-
07-5F in the MAC Address fi eld, enter wireless station B in the
Description fi eld, select Deny in the Privilege pull-down list and select
ENGLISH-39