Glacier bay 35603HBHD Guía De Uso Y Cuidado página 7

Installation (continued)
5
Inserting the tube plugs
□ Line up the cut-outs in the tube plugs (F, G) with top and
bottom holes.
□ Insert the 1 in. tube plug (F) into the 1 in. diameter tube (A).
□ Repeat this step using the 7/8 in. tube plug (G) and
7/8 in. diameter tube (B).
nOTe: This step may be easier if you insert a threaded
insert (CC) through the holes (only to be used as a guide)
before pushing the tube plug (F, G) into place. After
inserting the tube plug (F, G), be sure to remove the
threaded insert (CC).
6
Connecting the tubes
□ Insert the plastic ring (AA) into the end of the
1 in. diameter tube (A).
□ Insert the end of the 7/8 in. tube (B) into the end of the 1 in.
diameter tube (A).
7
Connecting the 1 in. tube
□ Fasten the 1 in. diameter tube (A) to the 1 in. mounting
bracket (D) using end cap screws (BB) and threaded
inserts (CC), and tighten with the large hex wrenches (GG).
□ To level the rod assembly, tighten the pre-installed set
screws on mounting bracket (D) with the medium hex
wrench (HH).
F and G
A
D
A
BB
7
Please contact 1-877-527-0313 for further assistance.
A and B
CC
AA
B
CC
pre-installed set screws
HOMEDEPOT.COM