Installing The Mounting Brackets - Glacier bay 35603HBHD Guía De Uso Y Cuidado

Installation (continued)
3
Preparing the wall for installation
WarninG: Before cutting, drilling or hammering into
any wall surface, verify the location of electrical, plumbing,
and gas lines.
nOTe: Use a 9/32 in. drill bit for drywall anchor
installation, or use a 5/32 in. drill bit for direct stud
installation.
nOTe: If installing into a material other than drywall or
a stud, consult a professional for proper installation.
□ Drill the two holes you marked on the wall for each end cap
(D and E) using the appropriate bit size.
□ If you are not installing directly into a stud, insert drywall
anchors (FF) in the holes.
4

Installing the mounting brackets

nOTe: Be sure to mount the mounting brackets (D and E)
to the wall with the open side facing the outside of the tub.
□ Fasten the 1 in. mounting bracket (D) to the wall,
using two mounting screws (EE).
□ Fasten the 7/8 in. mounting bracket (E) to the wall,
using two mounting screws (EE).
D
EE
EE
EE
EE
6
FF
FF
E