Steren CAL-150 Instructivo De Uso página 188

Octal, Decimal, Hexadecimal, and Binary Operations
In order to realize the following operations, you must me in
Base-N mode.
The numbers system is signaled by specifi c values by press-
ing the
afterwards (b, o, d, or h) immediately followed by the value.
The following operations cannot be realized in Base-N
mode.
Only whole numbers can be used in Base-N. If any results
contain a decimal value, the decimal value will be deleted.
Número de sistema
Number of system
Binario / binary
Octal
Decimal
Hexadecimal
The total range of numbers that can be used in this mode is
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, F.
If a value different to these is introduced to the system, an
error message will appear on the LCD screen.
Número de sistema
Nnumber of system
Binario / binary
Octal
Decimal
Hexadecimal
button and the number system you wish to use
Valores válidos
Valid values
0, 1
0, 1, 2, 3, 4, 5, 6, 7
0, 1, 2, 3, 4, 5, 6, 7, 8, 9
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, F
Número de dígitos mostrados
Number of displayed digits
Hasta 10 dígitos
Hasta 10 dígitos
Hasta 10 dígitos
Hasta 10 dígitos