Finishing Work - KTM Power Parts SXS13450512 Instrucciones

Finishing work

Make sure that the silencer is not touching any other parts of the motorcycle.
Remove all grease remnants with a soft cloth sprayed with multi-purpose lubricant (Motorex Joker 440).
Cleaning prevents stains from baking onto the surface. Do not use aggressive chemical cleaners as these may damage the sticker and
the nano-coating.
Make sure that all screws are tightened. If the exhaust system is touching the trim or other parts, readjust the unit or contact your
authorized dealer.
When the exhaust system is first put into operation, it is normal for white smoke to be emitted by the silencer. Finally, check for leaks
in the whole exhaust system.
Do not stand behind the exhaust when it is being used for the first time.
Maintaining the exhaust system
Clean with a multi-purpose lubrication spray (Motorex Joker 440).
A change in color of the exhaust system is normal due to high temperatures.
Wear and tear to the sound insulation material of the silencer depends on the type of engine and your driving style. Contact your dealer
in the event of visible changes to the outer sleeve of the silencer or if the noise level is raised. Periodically check that all screws are
tightened sufficiently and that the springs are seated correctly.
The rock wool of the main silencer must be replaced every 15 hours during competitive riding and every 30 hours during hobby riding
(for rock wool kit, see spare parts).
Spare parts:
6
Thermal protection foil
Spark arrestor insert
Rock wool kit
Label kit
77208013050
SXS13450505
60005099010
U6910056