dirna Bergstrom bycool SLIM FIT Diagnosis De Averías página 19

SLIM FIT
• Repair the possible obstruction of the blower or the electro; if the error persists,
replace the blower or electro (remove the outside cover of the unit in order to access
the blower or electro; for the blower, also remove the evaporator cover).
• Replace the 5A fuse. To access the electro or blower fuses, it is necessary to take
down the control panel access cover mounted on the front.
!
(If the error persists, contact the Authorised Technical Service).
• Reprogramme the remote control.
• Replace the remote control's battery and reprogramme.
• Replace electronic control. To access the electronic control, it is necessary to take
down the control panel access cover mounted on the front.
• Replace the remote control.
!
(If the error persists, contact the Authorised Technical Service).
• Correctly connect the control module terminals. (see attached wiring diagram).
• Replace the module(s).
• Replace the compressor(s).
• Check the pressure (the compressors disconnect after 6 bars); if necessary, recover
gas and load 250 g again per circuit. To access the compressors, modules or load
points it is necessary to take down the unit's outside cover.
!
(If the error persists, contact the Authorised Technical Service).
• Take down the front and correctly connect the belt in the keypad and in the
electronic control.
Solution
19
Air conditioning for vehicles
EN