Back Panel Connections And Settings; Speaker Controls - Wren Sound Systems V5US Guía De Configuración

Back Panel Connections and Settings

Setup Button
Used to enter various setup modes
3.5mm Aux Input
Connects any audio source to your
Wren V5US via a 3.5mm audio cable
Service Port
Used for firmware updates.
Reset Button
Reboots speaker by
cycling the power
off and back on.
RESET
100-240 VOLT
SETUP AUX IN EQ
EQ Adjustment
Adjusts bass output to
compensate for speaker
placement relative to power outlet
room walls
4
AC INPUT
AC Input
Connects
speaker to

Speaker Controls

Power/Standby
Powers on and off the Wren speaker.
White light indicates power is on;
amber light indicates volume is muted.
To turn on, press and release the Power
button; to turn off, press and hold the
Power button for seven seconds.
Volume Up
Increases the volume.
Volume Down
Decreases the volume.
Wifi Indicator
Indicates WiFi audio source
is selected.
Aux (3.5mm)
Source Indicator
Indicates Aux audio source is
selected.
Volume Adjustment Indicator
Flashes to indicate volume being
adjusted.
Source Selector
Selects the desired audio
input source.
Bluetooth Indicator
Indicates Bluetooth
audio source is selected.
5