Equipment Description - Briggs & Stratton PowerSmart Serie Manual Del Operador

Fuel Cap
QPT Switch
Low Oil Indicator
Starting Dial
Recoil Starter
Grounding Fastener
Maintenance Cover
Air Cleaner (under cover)
Spark Arrester Muffler/Exhaust
Oil Service Cover
Oil Fill Cap/Dipstick (under cover)
Identification Label
Air Cleaner — Filters engine intake air.
Fuel Cap — Add unleaded fuel here.
Grounding Fastener — Consult your local agency having
jurisdiction for grounding requirements in your area.
Identification Label — Provides model and serial number of
generator.
Starting Dial — Move dial to COLD START when starting
a cold engine. Move dial to RUN when restarting a warm
engine or after engine starts. Move dial to OFF to stop
engine, during storage and transporting.
Low Oil Indicator — This unit is equipped with a low oil
protection device. Oil must be at proper level for engine

Equipment Description

to run. If the engine oil drops below a preset level, an oil
switch will stop the engine. Check oil level.
Maintenance Cover — Remove to gain access to the air
cleaner.
Oil Fill Cap — Check, add and drain engine oil here.
Oil Service Cover — Remove to gain access to the oil fill.
QPT® (QUIET POWER TECHNOLOGY®) Switch — Use
this switch to turn the QPT on and off.
Recoil Starter — Used to start the engine manually.
Spark Arrester Muffler/Exhaust — Lowers engine noise and
is equipped with a spark arrester screen.
3