nedis Selfie Stick Guia De Inicio Rapido

a
Selfie Stick
Intended use
The SEST250BK is a smartphone holder that allows
you to take selfies from a greater distance.
The product is not intended for professional use.
Any modification of the product may have
consequences for safety, warranty and proper
functioning.
Specifications
Product
Article number
Dimensions (l x w x h)
Max. length
Smartphone holder width
Weight
Input power
Current
FM frequency
Antenna gain
Transmission power
Built-in wireless shutter
Material
Battery type
Main parts (image A)
Smartphone holder
1
Telescopic rod
2
Status indicator LED
3
Safety instructions
WARNING
-
• Always keep button cell batteries, both full and
empty, out of reach of children to avoid the
chance of swallowing. Dispose of used batteries
immediately and safely. Button cell batteries can
cause serious internal chemical burns in as little
as two hours when swallowed. Keep in mind that
the first symptoms may look like child diseases
like coughing or drooling. Seek immediate
medical attention when you suspect that
batteries have been swallowed.
• Ensure you have fully read and understood the
instructions in this document before you install
or use the product. Keep the packaging and this
document for future reference.
• Only use the product as described in this
document.
• Do not use the product if a part is damaged or
defective. Replace a damaged or defective
product immediately.
• Do not drop the product and avoid bumping.
• This product may only be serviced by a qualified
technician for maintenance to reduce the risk of
electric shock.
• Do not expose the product to water or moisture.
• Do not dismantle, open or shred batteries.
• Do not expose batteries to heat or fire. Avoid
storage in direct sunlight.
• Do not short-circuit a battery.
• Do not store cells or batteries haphazardly in a
box or drawer where they may short-circuit each
other or be short-circuited by other metal
objects.
• Do not subject cells or batteries to mechanical
shock.
• In the event of a cell leaking, do not allow the
liquid to come in contact with the skin or eyes. If
contact has been made, wash the affected area
with copious amounts of water and seek medical
advice.
• Only use the battery type(s) recommended in
this document.
• Keep cells and batteries clean and dry.
• Wipe the cell or battery terminals with a clean
dry cloth if they become dirty.
• Do not remove a battery from its original
packaging until required for use.
• Retain the original product literature for future
reference.
• When possible, remove the battery from the
product when not in use.
• Observe the plus (+) and minus (–) marks on the
cell, battery and equipment and ensure correct
use.
• Dispose of the cell or battery properly.
Bluetooth pairing
1. Press and hold the photo button A
seconds.
The status indicator LED A
product is in pairing mode.
2. Enable Bluetooth on the device you want to pair
the product with.
3. Select "SEST250BK" from the list of available
Bluetooth devices on your device.
A
lights up blue when pairing is successful.
3
Using the product
1. Place your smartphone into the smartphone
holder A
2. Press A
4
You can detach A
3. Press and hold A
the product.
Declaration of Conformity
We, Nedis B.V. declare as manufacturer that
the product SEST250BK from our brand Nedis
produced in China, has been tested according
to all relevant CE standards and regulations and
that all tests have been passed successfully. This
includes, but is not limited to the RED 2014/53/EU
regulation.
The complete Declaration of Conformity (and the
safety datasheet if applicable) can be found and
downloaded via:
nedis.com/sest250bk#support
For additional information regarding the
compliance, contact the customer service:
Web: www.nedis.com
E-mail: [email protected]
Nedis B.V., de Tweeling 28
5215 MC 's-Hertogenbosch, the Netherlands
Quick start guide
For more information see the extended
manual online: ned.is/sest250bk
.
1
to take a picture.
4
4
Selfie Stick
SEST250BK
190 x 49 x 45 mm (folded)
550 mm
60 – 90 mm
145 g
3.0 V
120 mAh
2400 - 2500 MHz
1 dBi
-6 - 4 dBm
Yes
Aluminium Alloy and ABS
Lithium button cell CR1632
(included)
4
5
blinks to indicate the
3
and use it as a remote control.
for 3 seconds to switch off
Photo button
Battery compartment
for 3
4
SEST250BK
,
®