Electrical Connections - Kichler LUCIAN Manual De Instrucciones

ELECTRICAL CONNECTIONS

WARNING: To avoid possible electrical shock, be sure you have
turned off the power at the main circuit panel.
Follow the steps below to connect the fan to your household wiring.
Use the wire connecting nuts suppled with your fan. Secure the
connectors with electrical tape. Make sure there are no loose wire
strands or connections.
NOTE: The CoolTouch™ Control System is equipped with 16
possible frequency combinations to prevent interference from or with
other remote control units. The frequency switches on your receiver
and transmitter have been preset at the factory. Please recheck to
make sure the switches on transmitter and receiver are set to the
same position, any combination of settings will operate the fan as long
as the transmitter and receiver are set to the same position. (Fig. 12)
Step 1. Insert the receiver into the ceiling mounting bracket with the
flat side of the receiver facing the ceiling. (Fig. 13) For best
performance, make sure the Black Antenna, on the end of the
receiver, remains extended and not tangled with any of the electrical
wires.
Code switch
ON
HI
ON ECE
LIGHT
MED
1 2 3 4
LOW
ON ECE
FAN OFF
1 2 3 4
Fig. 12
Receiver
Fig. 13
52" LUCIAN
Hanger
bracket
LED | 11
TM