West Bend QUIKSERVE 76026 Manual De Instrucciones página 6

5. Close the cover. Plug the cord into a 120 volt, AC electric outlet ONLY. Note:
The QuikServe
open position.
6. Press the "POWER" button. Press the "MODE" button repeatedly to scroll to the
desired cooking mode. Some modes will allow individual heating element
settings for optimum browning. If desired, press the "ELEMENT" button to
customize for your individual tastes.
7. Press the "UP/DOWN TIMER" button to set the desired cook time. For
suggested cooking times, refer to the cooking guide in this booklet rather than
the food-packaging recommendations. Most foods will cook faster in the
™
QuikServe
OR INSERT ANY OBJECT INTO THE VENTING HOLES AS YOU MAY CAUSE
HARM TO YOURSELF OR THE APPLIANCE.
8. Press "COOK" to confirm the settings and begin the cooking process.
Note: If the tray does not rotate, press the "POWER" button, unplug from the
electrical outlet and allow the appliance to cool completely. Using care not to
touch the heating elements, check to be sure the baking tray is positioned
correctly onto the rotating drive in the bottom of the base, food is centered on
the baking tray and does not extend beyond the baking tray area.
9. An alert will sound when the cooking time has elapsed. The baking tray will
continue to rotate to help evenly warm food. Press the "POWER" button to turn
the oven off, open the cover and check the contents. If additional cooking time
is needed, close the cover, and follow steps 6 – 8 again. Monitor the browning
progress through the viewing window. If necessary, the cover can be opened to
check the cooking results. When the cover is opened, the baking tray will stop
rotating. However, the heating elements will remain hot and foods will continue
to cook. The cover should not be left open for extended periods of time. If the
selected time has not elapsed, the baking tray will begin rotating again when the
cover is closed.
10. When the food is cooked as desired, press the "POWER" button to turn the
appliance off. Unplug the oven from the electrical outlet. Using hot pads or
oven mitts open the cover. Using a non-metal spatula or utensil, carefully
remove the food from the baking tray and place on to a serving tray, cooling
rack or cutting board. The handles on the trivet can be used to move the entire
baking tray to a heat resistant area. DO NOT CUT PIZZA OR OTHER FOODS
ON THE BAKING TRAY AS SCRATCHING MAY OCCUR.
11. Unplug the cord from the electrical outlet and clean after each use as directed in
the "CLEANING YOUR QUIKSERVE
CAUTION: NEVER TOUCH THE HEATING ELEMENTS DURING OR AFTER
COOKING AS SERIOUS BURNS MAY RESULT. LET THE OVEN COOL
COMPLETELY BEFORE CLEANING.
™
Oven can not be programmed or operated with the cover in the
Oven than in a conventional oven. CAUTION: DO NOT BLOCK
™
OVEN" section of this manual.
6