Kitchen Timer; Time Cooking; +30 Sec - Sanyo EM-S5595S Manual De Instrucciones

KITCHEN TIMER

To set kitchen timer for 2 minutes:
Step Procedure
Press KITCHEN TIMER.
1
tone will sound. The display will show
"00:00" with the first "0" flashing.
Enter desired time. You must press 4
numbers to set the timer (2 for the
2
minutes and 2 for the seconds).
When entering 1-9 minutes, a zero
must be entered first.
Press START.
3
The display will show the time remaining.
Note: • Five beeps indicate the KITCHEN TIMER is finished.
• Press STOP/CLEAR to cancel KITCHEN TIMER.
• The maximum time that can be set is 99 minutes 99 seconds.

TIME COOKING

This basic microwave cooking method allows you to cook food for a desired
time. In addition to 100% (PL 10) power level, you can select different
microwave power from 9 levels, 1-9 (10-90% of total power level).
Example: To cook at 80% power level for 20 minutes:
Step Procedure
Enter a cooking time in minutes and
1
seconds. Enter 2, 0, 0, and 0.
Press POWER
1-10 times.
indicator lights.
High power
symbol " "
lights when 8-10
2
power levels are
entered.
Low power symbol
" "lights when
1-7 power levels
are entered.
Press START.
3
+
or
Note: • If no power level is entered, the power level will always be 100% (PL 10).
• The maximum time that can be set is 99 minutes 99 seconds.

+30 SEC.

This feature provides 2 functions:
• You may quickly start TIME COOKING by pressing +30SEC.
The maximum time that can be set is 99 minutes 59 seconds.
• You can add extra time while using TIME COOKING, DIRECT ACCESS
and TIME DEFROST programs. Press +30SEC. while cooking is in
progress to add time in 30 second increments. This feature may not
be used with the WEIGHT DEFROST program.
lights and a
lights and flashes.
Power
Press
Level
once PL 10 100%
twice PL 9 90%
3 times PL 8 80%
4 times PL 7 70%
5 times PL 6 60%
6 times PL 5 50%
7 times PL 4 40%
8 times PL 3 30%
9 times PL 2 20%
10 times PL 1
will flash while cooking.
12
Keypad
KITCHEN TIMER
02:00
START
Keypad
20:00
%
POWER
(Press POWER three times)
(PL 8 appears in the display)
0%
START