The Rear Panel - Steren COM-820 Manual De Instrucciones

Name
Pwr
Sys
Link / Act
WLAN

THE REAR PANEL

Wireless antenna
Factory Default Reset button
There are two ways to reset the router's factory defaults:
1) Use the Factory Defaults function on System Tools -> Factory
Defaults page in the router's Web-based Utility.
2) Use the Factory Default Reset button: First, turn off the
router's power. Second, press and hold the default reset button
then turn on the router's power, until the system LED lights up
(about 3 seconds). Last, release the reset button and wait for the
router to reboot.
WAN RJ45 port for connecting the router to a cable, DSL
modem, or Ethernet
Four LAN 10/100Mbps RJ45 ports for connecting the router to
the local PCs
Action
Not lit
Lit up
Lit up
Flashing
The router has a hardware
Not lit
There is no device linked to
Not lit
There is a device linked to
Lit up the corresponding port but
Flashing linked to the corresponding
The wireless radio funcion is
Not lit
The wireless radio funcion is
Flashing
ENGLISH-4
Description
No power
Power on
The router is initialising
The router is working
properly
error
the corresponding port
no activity
There is an active device
port
disabled
enabled