Steren COM-820 Manual De Instrucciones página 13

- Region - Select your region from the pull-down list. This fi eld
specifi es the region where the wireless function of the router
can be used. It may be illegal to use the wireless function of the
router in a region other than one of those specifi ed in this fi led.
- Channel - the current channel in use. This fi eld determines
which operating frequency will be used.
- Mode - Indicates the current mode (108Mbps (Dynamic),
108Mbps (Static), 54Mbps (802.11g), 11Mbps (802.11b)). If
you select 108Mbps (Dynamic), it is compatible with 54Mbps
(802.11g) and 11Mbps (802.11b). If you select 54Mbps
(802.11g), it is compatible with 11Mbps (802.11b).
These settings are only for basic wireless parameters, for
advanced settings, please refer to Section: "Wireless."
The change of wireless settings won't take effect until the The change of wireless settings won't take effect until the
router reboots! You can reboot it manually. If you need router reboots! You can reboot it manually. If you need
instructions as to how to do this, please refer to Section: instructions as to how to do this, please refer to Section:
"Rebooting the Router" "Rebooting the Router"
Click the Next button, you will then see the Finish page:
Fig. 10
After fi nishing all confi gurations of basic network parameters,
please click Finish button to exit this Quick Setup.
ENGLISH-13