Idiomas disponibles
Idiomas disponibles
1. Hang hood from (4) Mountin_
(from parts bag).
Slide hood towards walI until mounting screws are engaged
in narrow end of (4) _.
Tighten mounting screws
securely.
CAUTION:
Do not push on filter
or fan bmade!
Pushing
on the filter or fan bmade may cause them
to interfere with other hood parts,
KEYHOLE
(4)
MOUNTING
SCREW
(4)
2. Connect ductwork to hood. Use Duct Tape to make joints
secure and air tight.
DUCT
3¼" x 10" or 7" ROUND DUCTWORK
(3¼ " x 10" ductwork show;,_)
/
/
\
-\
3. Install two (2) 75 W Maximum Li_
Bumbs. Purchase bulbs
locally. Gently squeeze L_ght Lens Leg_s_ to remove and
replace lens.
CAUTION:
Bulbs may be hot! Refer to bulb pack-
aging for further
information.
4. Make sure fan blade turns freely. Turn on power at service
panel, and test for proper operation.
75 W MAXIMUM
MGHT BULBS
10
MGHT LENS
LEGS
