Warning Symbols; Electrical Safety - Black and Decker BEMW461ES Manual De Instrucciones

ENGLISH
If operating the mower in a damp
u
location is unavoidable, use a residual
current device (RCD) with a tripping
current of not more than 30 mA.
Use of an RCD reduces the risk of
electric shock.
Never pick up or carry an appliance
u
while the motor is running.

Warning symbols

The following warning symbols are found
on the appliance along with the date
code:
Warning! Read the manual prior
to operation.
Do not expose the appliance to
rain or high humidity.
Always remove the plug from
the socket before inspecting
a damaged cable. Be careful
not to use your appliance if the
cable is damaged.
Beware of sharp blades.
Beware of flying objects. Keep
bystanders away from the
cutting area.
Keep the cable away from the
cutting blades.
The blades will continue to
rotate after the machine is
switched off.
12
(Original instructions)
Directive 2000/14/EC
96
guaranteed sound power

Electrical safety

Warning! This tool is double
insulated; therefore no earth
wire is required. Always
check that the power supply
corresponds to the voltage on
the rating plate.
If the supply cord is damaged, it must
u
be replaced by the manufacturer or an
authorised BLACK+DECKER Service
Centre in order to avoid a hazard.
Electric safety can be further improved
u
by using a high sensitivity 30 mA
Residual Current Device (RCD).
Features
This appliance includes some or all of the following features.
1. Power button
2. Comfort grip handles
3. On/off switches
4. EasySteer pivot control
5. EasySteer pivot control buttons
6. Upper handle
7. Handle knobs
8. Cable management system (BEMW471ES, BEMW481ES
units only)
9. Lower handle
10. Back flap
11. Carrying handles
12. Height adjustment gauge
13. Height adjustment lever
14. Grass box
14. Grass box handle
Assembly
Warning! Before assembly, make sure that the appliance is
switched off and unplugged.