Steelcase 460 Rapport Manual Para El Reemplazo página 11

3.
Install ribber pivot bumpers onto back and
place back assembly onto uprights.
4.
Install flat head bolts and bushings. Torque to 100 in.-lbs.
5.
Snap lumbar into slots.
6.
Attach upper blanket to inner back assembly
with ratchet fasteners.
3 and 4
5
A
A
B
6
C
B
B
NOTE: Trim off approximately 1/4" from the end
of each fastener after blanket is installed.
A
B
Page 11 of 60
939504522 Rev G