Tabla de contenido
Idiomas disponibles
Idiomas disponibles
3. Press MUTE/REMOVE to delete the selected entry.
Find handset (Paging)
You can ring a handset to help locate it.
1. Press PAGE on the base. All idle handsets ring and display ** Paging **.
2. Press PAGE on the base again to stop the paging, or press HOME, SPEAKER, MOBILE or
any dial pad key (0-9, *, or #) on any handset.
H. Ringers
Temporary ringer silencing
When the telephone is ringing, you can temporarily silence the ringer of the handset or telephone
base without disconnecting the call. The next call rings normally at the preset volume.
To silence the handset ringer:
Press C or MUTE/REMOVE on the handset and Ringer muted appears.
To silence the base ringer:
Press VOLUME- on the telephone base until L0 displayed in base LED.
Note: Each handset will ring when there is an incoming call unless the ringer volume is turned off.
Pressing C or MUTE/REMOVE on one handset will only silence the ringer of that particular
handset.
I.Chain dialing
This feature allows you to initiate a dialing sequence from numbers stored in the phonebook, call
list history or redial list while you are on a call.
Chain dialing can be useful if you wish to access numbers other than phone numbers (such as
bank account information or access codes) from the phonebook, call list history or redial list.
To access a number in the phonebook while on a call:
1.
Press MENU/OK then select Phonebook.
2.
Select Home phonebook.
3.
Scroll to the desired entry or perform an alphabetical search
4.
Press MENU/OK to dial the displayed number.
To access a number in the call log while on a call:
1. Select Call log.
2. Select the desired call list entry.
3. Press MENU/OK to dial the displayed number.
To access the redial list while on a call:
1. Press REDIAI/PAUSE.
2. Press UP, DOWN or REDIAI/PAUSE until the desired number displays.
3. Press MENU/OK. If you do not press MENU/OK within two seconds, the number displayed
is dialed automatically.
TX Bluetooth
64
Capítulos
Tabla de contenido
