Usb Connection - Pfeiffer Vacuum TPG 36X Instrucciones De Instalación

EN
5-pin M12 female appli-
ance connector
5
1
4

USB connection

B-type USB
4 3
1 2
A-type USB
1 2 3 4
Ethernet
8-pin RJ45
8 1
8
Pin Assignment
1 RS-485: D+
2
2 +24 V
3 GND
4 RS-485: D-
5 not connected
3
z.B. PC
Chassis
RXD
TXD
GND
(Minimalkonfiguration/Minimal configuration)
B-type USB
The B-type USB port facilitates direct communication with the TPG 36x via a computer
(e.g. firmware update, parameter storage (read/write)).
Pin Assignment
1 VBUS (+5 V)
2 D- 3 D+
4 GND
 Connect a USB port with a shielded cable (electromagnetic compatibility) to the USB
terminal on the back of the device.
A-type USB
The A-type USB port, which has master functionality, is located on the front and is used
for the connection of a USB memory stick (for instance, for firmware updates, parameter
storage (read/write), data logger).
Pin Assignment
1 VBUS (+5 V)
2 D-
3 D+
4 GND
 Connect the USB memory stick to the USB port on the front of the device.
The Ethernet port supports direct communication with the TPG 36x via a computer.
● Green LED: Link or transmit LED.
– Indicates that a hardware-based connection exists.
● Yellow LED: Status or packet-detect LED.
– Indicates the status of the transmission. Whenever this LED flashes or flickers, this
indicates that data is being transmitted.
Pin Assignment
1 TD+ (transmitted data +)
2 TD- (transmitted data -)
3 RD+ (received data +)
4 NC
5 NC
6 RD- (received data -)
7 NC
8 NC
 Connect the Ethernet cable to the port on the back of the device.
TPG 26x, TPG 36x
Chassis
RXD
2
3
TXD
GND
5