Pfeiffer Vacuum TPG 36X Instrucciones De Instalación página 5

Connecting to the mains power supply
S1
 Stick the two supplied rubber feet to the rear part of the bottom plate.
 Slip the supplied rubber bar onto the bottom edge of the front panel.
The TPG 36x is equipped with an universal power supply with an input voltage range of
100 ... 240 V AC.
Excess voltage!
Danger of destroying the unit.
 Power connections must comply with local regulations. Voltage information given on
the rating plate must correspond to the mains voltage values.
 Use only cable with protective earth conductor.
 To protect the electronics and the power supply cable in case of failure provide an
appropriate network safety device.
Danger of electric shock
In case of defect, the parts connected to the mains supply are under voltage.
 Always keep the mains connection freely accessible so you can disconnect it at any
time.
10 A
max
Fig. 4: Mains cable with protective earth conductor
 Switch off switch S1 on the power pack (position "0").
CAUTION
WARNING
EN
5