Tabla de contenido
Consumer Safety Information
THIS APPLIANCE IS INTENDED FOR HOUSEHOLD USE ONLY.
This appliance has a polarized plug
(one blade is wider than the other).
As a safety feature, this plug will fit in a
polarized outlet only one way. If the
plug does not fit fully in the outlet,
reverse the plug. If it still does not fit,
Before You Use Your Hand Blender
Wash all parts. See "How to Clean Your Hand Blender."
How to Use Your Hand Blender
1. Plug power cord into 120 volt AC
outlet.
2. Place blade-end of unit directly into
bottom of a tall plastic container
holding ingredients to be blended.
3. Your blender has LO and HI speeds
for quick blending. Press the LO or
HI switch for continuous blending.
Blending action stops when switch is
released. NOTE: During use, it is
normal for a suction to be created at
How to Use Your Chopper Attachment
CAUTION: Sharp Blades. The chopper is intended for use for chopping onions,
herbs, carrots, nuts, etc., up to 150 grams (or approximately
not chop ice cubes or very hard nuts in chopper bowl.
1. Make sure the unit is unplugged.
2. Twisting the shaft to the right until
the motor housing and the blender
separate.
3. Remove chopper bowl lid and add
food contents. Be careful of sharp
blade. Replace
chopper bowl lid.
4. Attach the motor
housing to the
chopper
attachment and
turn until it locks.
Use caution as the
blade is very sharp.
contact a qualified electrician. Do not
attempt to defeat this safety feature.
CAUTION: To reduce the risk of electrical
shock, do not immerse the motor housing
in water.
the bottom of the container.
4. For a short "burst" of blending,
quickly push and release the LO or
HI switch.
5. After blending, unplug unit.
CAUTION: Do not use blender in
saucepan directly on stovetop.
Remove pan from heat before
blending. To avoid splatter, never lift
blender out of hot ingredients while
motor is on (see "Tips", next page).
1
⁄
2
5. Press the switch to operate the
chopper. The HI setting is
recommended for meats and cheese,
and the LO setting for vegetables,
nuts, etc.
6. Detach the motor housing, remove
the chopper bowl cover, and
carefully take out the chopper blade.
7. Use a spatula or spoon to remove
the processed food from the bowl.
8. A convenient storage cover is
supplied with your food chopper so
that you can store any leftover
processed food.
The chopper clear bowl and blade
the bowl) at a time. Do
3
Tabla de contenido
