Tabla de contenido
Idiomas disponibles
Idiomas disponibles
PEDESTAL INSTALLATION
The pedestal accessory includes:
• Drawer divider (1)
• S crews (18) †
† Dryer installation only uses 8 screws
†† For dryer only
Tools Needed for Installation:
• P hillips-head screwdriver
• W rench (supplied)
Retract fully
To set the dryer to the same height as the
1
washer, fully retract the leveling feet of the
dryer by turning them counterclockwise, then
turn them clockwise 1-1/2 turns.
NOTE: The appliance and pedestal assembly
must be placed on a solid, sturdy, level floor
for proper operation.
3828EL3004Y_091106_En.indd 41
• Wrench (1)
• Retainers (4) ††
Then loosen
1-1/2 turns
To ensure safe and secure installation, please
thoroughly follow the instructions below.
wWARNING
• Incorrect installation can cause serious
accidents.
• The appliances are heavy. Two or more
people are required when installing the
pedestal. There is a risk of serious back injury
or other injuries.
• Do not allow children to play in or on the
drawer. There is a risk of suffocation or injury.
• Do not step on the handle. There is a risk of
serious injury.
• If appliances are already installed,
disconnect them from all power, water, or
gas lines and from draining or venting
connections. Failure to do so can result in
electrical shock, fire, explosion, or death.
• When installing, gloves must be put on.
T-clip
Retainer
Insert the T-clip of the 4 retainers into the
2
dryer base as shown. Press up on the
back of the clip and pull outward to lock
into place.
41
2009.11.6 1:42:27 PM
Capítulos
Tabla de contenido
