Axxess LC-BMRC-01 Instrucciones De Instalación página 3

Installing the LC-BMRC-01
With the key in the off position:
• Connect the LC-BMRC-01 harness into the interface, and then to the vehicle.
• Re-insert the fuse back into the fuse holder.
LC-BMRC-01
Initializing the LC-BMRC-01
Attention! If the interface loses power for any reason, the following steps will need
to be performed again. Also, if installing an ASWC-1 connect it after you initialize
and test the interface/radio, with the key in the off position.
• Turn the key (or push-to-start button) to the ignition position and wait until the
radio comes on.
Note: If the radio does not come on within 60 seconds, turn the key to the
off position, disconnect the interface, check all connections, reconnect the
interface, and then try again.
• Turn the key to the off position, and then to the accessory position. Test all
functions of the installation for proper operation, before reassembling the dash.
3