Axxess AX-ADBOX Serie Instrucciones De Instalación

Installation instructions for AX-ADBOX2
AX-ADBOX Series main interface control box
Note: This is a general list for the AX-ADBOX2 lineup. Please see the individual
harnesses for exact features available.
• Provides accessory (12-volt 10-amp)
• Retains R.A.P. (retained accessory power)
• Used in amplified, non-amplified systems
• Retains chimes (GM)
• Turn signal click (GM)
• Provides NAV outputs (parking brake, reverse, mute, and V.S.S.)
• Pre-wired ASWC-1 harness included (ASWC-1 sold separately)
• Retains OnStar/OE Bluetooth
• Adjustable gain control for overall volume (on amplified systems)
• Adjustable gain control for chimes and OnStar (GM)
• Retains SYNC in Ford (if equipped)
• Adjustable gain control for SYNC (Ford)
• Retains Blind spot detection system in Chrysler/Dodge/Jeep (if equipped)
• High level speaker input
• Micro "B" USB updatable
• Retains balance and fade
• Retains digital fade (excluding Ford and VW vehicles)
Note: If you have a digital amp and you prefer to retain fade control use the
AX-ADBOX1 (excluding Ford and VW vehicles).
METRA. The World's best kits.™
AX-ADBOX2
FEATURES
1-800-221-0932
APPLICATIONS
See application list inside
INTERFACE COMPONENTS
• AX-ADBOX2 interface
• 16-pin harness with stripped leads
TOOLS REQUIRED
• Cutting tool • Crimping tool • Tape • Connectors
(example: butt-connectors, bell caps, etc.)
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
metraonline.com
© COPYRIGHT 2004-2014 METRA ELECTRONICS CORPORATION