NEC MultiSync LCD195NXM Manual Del Usuario página 15

EXIT
Selecting EXIT allows you exit OSM menu/sub menu.
LANGUAGE
OSM control menus are available in nine languages.
OSD TURN OFF
The OSM control menu will stay on as long as it is in use. In the
OSM Turn OFF submenu, you can select how long the monitor
waits after the last touch of a button to shut off the OSM control
menu. The preset choices are 10 - 120 seconds in 5 second inter-
vals.
OSM LOCK OUT
This control completely locks out access to all OSM control func-
tions without Brightness and Contrast. When attempting to activate
OSM controls while in the Lock Out mode, a screen will appear
indicating the OSM are locked out. To activate the OSM Lock Out
function, press "1<->2 / RESET", then "+" key and hold down
simultaneously. To de-activate the OSM Lock Out, press "1<->2 /
RESET", then "+" key and hold down simultaneously.
RESOLUTION NOTIFIER
If ON is selected, a message will appear on the screen after 30
seconds, notifying you that the resolution is not at optimal resolution.
DDC/CI
Turns on or off the two-way communication the graphics card and the
monitor. With DDC/CI turned on, some monitor settings can be adjusted
through the graphics card using a computer.
MONITOR INFO
Indicates the model and serial numbers of your monitor.
OSM Warning:
®
NO SIGNAL:
This function gives a warning when there is no signal present.
After power is turned on or when there is a change of input signal or video
No Signal
is inactive, the
RESOLUTION NOTIFIER:
resolution. After power is turned on or when there is a change of input signal
or the video signal doesn't have proper resolution, the
window will open. This function can be disabled in the TOOL menu.
OUT OF RANGE:
resolution and refresh rate. After the power is turned on or there is a change
of input signal or the video signal doesn't have proper timing, the
Range
menu will appear.
OSM Warning menus disappear with SELECT button.
window will appear.
This function gives a warning of use with optimized
This function gives a recommendation of the optimized
Controls
Resolution Notifier
13
- continued
Out Of