Features; Assembly - RIDGID R8660 Manual Del Operador

FEATURES

PRODUCT SPECIFICATIONS
Motor .................................................................. 18 Volt DC
Switch ........................................... Single speed/Reversible
kNOW YOUR COLLATED SCREWDRIVER
See Figure 1, page 13.
The safe use of this product requires an understanding of
the information on the product and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all
operating features and safety rules.
ADJUSTABLE NOSEPIECES
Your screwdriver has an adjustable nosepiece for varying
screw depth and easy bit changes. There are two nosepieces
included, one for wood and one for drywall.
BELT CLIP
The convenient belt clip can be used on either side of the
tool.

ASSEMBLY

UNPACkING
This product has been shipped completely assembled.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if it is not completely
assembled or if any parts appear to be missing
or damaged. Use of a product that is not properly
and completely assembled could result in serious
personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-866-539-1710 for assistance.
No Load Speed ..................................... 3,500 r/min. (RPM)
Screw Sizes ............................................. 1 in. - 3 in. length
BIT RELEASE
The bit release makes it quick and easy to change bits
without the use of tools.
DEPTH OF DRIVE ADJUSTMENT
The drive depth can be adjusted for different applications
and workpiece thickness.
DIRECTION OF ROTATION SELECTOR
(FORWARD/REVERSE/CENTER LOCk)
The screwdriver has a direction of rotation (forward/reverse/
center lock) selector located above the switch trigger for
changing the direction of bit rotation.
PACkING LIST
Screwdriver
Adjustable Nosepiece (Wood)
Adjustable Nosepiece (Drywall)
6-1/4 in. Phillips Bit
Square Head Bit
3/32 in. Hex Key
9/64 in. Hex Key
Nosepiece pads (3)
Battery Pack
Charger
Tool Bag
Operator's Manual
WARNING:
If any parts are damaged or missing do not operate
this product until the parts are replaced. Use of
this product with damaged or missing parts could
result in serious personal injury.
6 - English