NEC MultiSync LCD2070NX Manual Del Usuario página 15

Image Controls
LEFT / RIGHT
Controls Horizontal Image Position within the display area of the LCD.
DOWN / UP
Controls Vertical Image Position within the display area of the LCD.
H.SIZE
Adjust this setting to increase or decrease the horizontal size.
FINE
Adjust this setting to improve focus, clarity, and image stability.
AccuColor
AccuColor
and NATIVE color presets are standard and cannot be changed).
R,G,B: Increases or decreases Red, Green or Blue color depending upon which is
selected. The change in color will appear on screen and the direction (increase or
decrease) will be shown by the bars.
NATIVE: Original color presented by the LCD panel that is unadjustable.
sRGB: sRGB mode dramatically improves the color fidelity in the desktop
environment by a single standard RGB color space. With this color supported
environment, the operator could easily and confidently communicate color
without further color management overhead in the most common situations.
Tools
SHARPNESS (LCD2070VX/LCD2170NX): This function allows the adjustment of
the crispness of the displayed image at any time. The image can be as distinct or
as soft as the user prefers. The amount of image adjustment is different depending
on whether EXPANSION Mode is set to OFF, FULL or ASPECT.
EXPANSION MODE (LCD2070VX/LCD2170NX): Sets the zoom method.
FULL: The image is expanded to 600 x 200, regardless of the resolution.
ASPECT: The image is expanded without changing the aspect ratio.
OFF: The image is not expanded.
OFF TIMER: Monitor will automatically power-down when the end user has
selected a predetermined amount of time.
HOT KEY: You can adjust the brightness and contrast directly. When this function is
set to ON, you can adjust the brightness with left or right control and contrast with
up or down control while the OSM menu is off.
FACTORY PRESET: Selecting Factory Preset allows you to reset all OSM control set-
tings back to the factory settings. The RESET button will need to be held down for
several seconds to take effect. Individual settings can be reset by highlighting the
control to be reset and pressing the RESET button.
(Analog input only)
Control Systems
®
Control Systems: Six color presets select the desired color setting (sRGB
®
Controls
3
- continued