System Requirements - i-tec USB3HDTRIO Manual De Instrucciones

EN
INTRODUCTION
This USB Display Adapter convert USB 3.0 to graphic output DVI-I. It enables you to connect
one more monitor, LCD or projector to a computer with a USB 2.0 port. Can be used in your
office (for graphic designer, financial department, ...), you can use it for making multiple
screen presentations, on fairs or for your home-use (entertainment). Adapter supports
resolution not only up to Full HD 1920x1080 pixels, but also up to 2048x1152 pixels. Owing
to included adapters it can be used with devices equipped with VGA or HDMI connectors
(LCD, Plasma TV, etc.).
CONTENT
1. USB 2.0 Display Adapter
2. DVI to VGA Adapter
3. DVI to HDMI Adapter
4. USB 3.0 cable 45 cm long (one end USB 3.0 A type connector, second end micro USB
3.0 connector) – for connection of adapter to PC/laptop.
5. User manual
SPECIFICATION
1. USB 3.0, powered by USB, do not need external power source
2. DVI-I / VGA / HDMI (just video, without sound)
3. RAM: 512 MB
4. Supported Resolutions: 640x480, 800x600, 1024x768, 1280x720, 1280x768,
1280x800, 1280x1024, 1366x768, 1400x1050, 1600x1200, 1680x1050, 1920x1080,
1920x1200, 2048x1152
5. Dimension: 84 x 54 x18 mm
6. Working temerature: 10-40ºC
7. Supported Modes: Extend (Default), Mirror, Primary Display
8. Supported colors: 16 / 32 bit

SYSTEM REQUIREMENTS

1. Hardware: PC, one available USB 3.0 port. If you have USB 2.0 or USB 1.1, the transfer
speed will be slower. Processor Intel Pentium 1.2GHz or higher, 512MB RAM (we
recommend processor Intel Pentium 2.0 or higher and 1GB RAM).
2. OS: 7 / 8 / 8.1 / 10, macOS X, Linux Ubuntu 14.04, 16.04, 17.10, Android 5 (Lollipop)
and higher.
DRIVER INSTALLATION IN WINDOWS
Do not connect the adapter to your computer before installing the provided driver.
For Windows 7 / 8 / 8.1, download the drivers from our website www.i-tec.cz/en on the
"Manuals, drivers" tab of this product or on www.i-tec.cz/setup. Run the installation from
the downloaded file, select the installation language, and follow the instructions on the
screen.
In Windows 10, the docking station can be connected directly, drivers are automatically
installed from the system when connected to the Internet.
Note: In Windows 7 / 8 / 8.1 / 10, install the drivers as the "Administrator" user. The screen
may blink while the drivers are being installed, this is a standard process. Once the
installation is complete, we recommend restarting the notebook / PC.
4
Quick Start / USB 3.0 Display Adapter TRIO