Lumex 7927KD-1 Instrucciones Para Uso página 2

Instructions for Use –
Please Read All Instructions Before Use.
Attaching the Leg Extensions
(if not attached already)
1. Place frame on its side on a level surface.
2. Attach leg extensions with suction feet to the frame on the same side as where
the support arm will be. Attach leg extensions with flange tips to frame on
opposite side of frame.
3. The transfer bench legs with suction feet should be the two legs that are to be
placed inside the tub.
NOTE: Ensure leg extension push buttons protrude fully through plastic guide holes.
Attaching the Backrest
1. Determine the side on which the backrest should be mounted by knowing
which direction the user will face when sitting on the bench in the tub.
2. Position the bench upright on a level surface.
3. Locate the channel guides (4 each) on underside of seat. Align backrest
support tubes with channel guides.
4. Slide backrest seat support tubes through channel guides until seat support
tube push buttons protrude fully through channel guide holes.
5. Slide back support onto the seat support tubes until the push buttons protrude fully.
NOTE: Ensure seat support tubes buttons protrude fully through channel guide holes.
CAUTION: Backrest is not designed to support the full weight of the user.
CAUTION: Ensure backrest is facing down correctly before inserting to avoid
improper installation.
Attaching the Support Arm
1. To attach the support arm, position the seat arm against the leg frame and
slide the armrest tubing into the tube openings until it clicks into place. Make
sure that the push buttons fully protrude through the holes in the bracket.
NOTE: An audible "click" will be heard.
2. To remove the support arm, depress the push buttons and pull up.
NOTE: The end with the Support Arm and Suction Feet is the side that should be
inside the tub.
Adjusting Leg Height
1. Depress the height adjustment button and slide the lower leg upward or
downward until the height adjustment button clicks into place in the desired hole.
2. Repeat for other 3 legs.
CAUTION: Ensure that all four legs are adjusted to the same height, and that all
height adjustment buttons protrude fully through adjustment holes before use.
Using Your Transfer Bench
NOTE: Be sure to move slowly throughout use to prevent injuries.
NOTE: Children or those who need assistance should NOT be left unattended
during use of this product.
From a seated position (such as a wheelchair):
1. Place your wheelchair next to the bench, facing the front of the bathtub.
2. Engage wheelchair locks.
3. Transfer your torso to the transfer bench first, and then lift your legs into the
tub. Move slowly to prevent injuries.
4. After bathing, lift your legs out of the tub first, then your torso.
From a standing position:
1. Sit on the side of the transfer bench that is outside of the tub.
2. Extend your arms to grab the support arm of the bench and slide your body
over onto the bench. Lift each leg over the tub slowly.
3. Position yourself to a comfortable position in center of bench.
4. After bathing, lift your legs out of the tub first, then your torso slowly.
Support Arm
Adjustable leg
Suction Tip
Back Support
Platform
Tip