Lumex 700176C Instrucciones De Montaje Y Funcionamiento

SAfety GuiDeLineS - pLeASe reAD BefOre uSe
WARNING: Important: Read and understand these instructions before assembling or using the Fold-
Away Onyx Walker. Ensure that the FoldAway Onyx Walker is assembled as described in the follow-
ing paragraphs before use. If the FoldAway Onyx Walker is not properly assembled, personal injury
and/or property damage could result.
WARNING: Do not use this product without proper instruction from a healthcare professional.
WARNING: GF Health Products, Inc. assumes no responsibility for any damage or injury caused by
improper assembly or use of this product.
WARNING: If components are damaged or missing, contact your Graham-Field distributor immedi-
ately. DO NOT use substitute parts.
WARNING: Before using the FoldAway Onyx Walker, ensure that the release mechanisms are locked
in the open position, release levers are lowered, all legs are locked in place in walker frame, and
that all leg-frame assembly and leg height adjustment buttons protrude through holes.
WARNING: Always use caution when using this product on wet or slippery surfaces.
ASSeMBLy
Remove walker from box. The walker is packed in col-
lapsed position, as shown at right.
Note: Walker legs are assembled with elastic shock cord
(bungee cord), so that the legs will not detach from the
frame when the walker is collapsed.
Open walker
1. Grasp one handgrip and pull away from center of
walker.
2. Repeat with other handgrip. Push handgrips away
from each other until the release mechanisms lock
into place (you will hear a click to confirm that the
release mechanisms are locked into position) and
the release levers are lowered.
3. Engage legs: Remove each walker leg from the
built-in clip on walker frame; keep clip on walker
frame.
4. Insert leg tubing into walker frame, press the
push button, and secure leg in walker frame. Re-
peat with all legs until walker is in full assembled
position.
5. Ensure that release mechanisms are locked in the open position, release levers are lowered, all legs are locked in
place in walker frame, and that all four leg buttons protrude through frame holes.
700176C-INS-LAB-RevA08
All manuals and user guides at all-guides.com
700176C: FoldAwAy onyx wAlker
ASSeMBly And operATIon InSTrUCTIonS
pleASe SAVe THeSe InSTrUCTIonS For FUTUre USe
clip
frame
leg
elastic shock cord
handgrip
1
button
3 4
release lever
2
5
1