Home Decorators Collection 91144 Guía De Uso Y Mantenimiento página 10

Assembly - Hanging the Fan (continued)
3
Wiring the fan to the receiver
WARNING: Remove the rubber motor stops on the bottom of the
fan before installing the blades or testing the motor.
IMPORTANT: Use the wire connecting nuts (DD) supplied with your
fan. Secure the connectors with electrical tape and ensure there
are no loose strands or connections.
NOTE: The fan comes with 30 in. lead wires for use with an
extended ball/downrod assembly. If using the 4.5 in. ball/downrod
assembly (B) provided, you can cut the lead wires to your desired
length (no shorter than 12 in.).
□
The fan comes with 30 in. lead wires for use with an extended
ball/downrod assembly. If using the 4.5 in. ball/downrod
assembly (B) provided, you can cut the lead wires to your
desired length (no shorter than 12 in.) This will make extra
room in the canopy (C), if you do not wish to cut the wires,
you will need to neatly wrap them.
□
Connect the fan motor green wire(s) to the household green
or bare wire using a wire connecting nut (DD).
□
Connect the fan motor white wire to the household white wire
using a wire connecting nut (DD).
□
Connect the fan motor black and blue wires to the household
black wire using a wire connecting nut (DD).
□
Secure each wire connecting nut using electrical tape.
□
Turn the wire connecting nut (DD) upward and push the wiring
into the outlet box (NN).
Black
White
Blue Black White
10
Outlet box
in the ceiling
(NN)
Green or bare
Green
DD (x3)
A
C
E