Tabla de contenido
Idiomas disponibles
Idiomas disponibles
OPERATION
Connect the power
•
cord and turn the
ON/OFF switch on.
Make sure the green
•
light is on.
Place the tool in the
•
middle of the induction
cavity making sure
you do not touch the
inner wall.
The sensors will
•
detect the tool or your
hand (it could be
difficult if the tool is
too thin).
The red light will light
•
up and the tool will
reach a high
temperature very
quickly.
As a safety measure,
•
if a tool is kept inside
the induction tank for
a long time, the heater
will stop and will show
a light sign (quick
flickering of red and
green lights).
WARNING!: do not insert metallic rings
in your fingers inside the induction
cavity.
MAINTENANCE AND CLEANING
To ensure a long life of the unit and an optimal
operation, we strongly recommend:
• To clean the wax remains from the induction
cavity, the casing and the sensors periodically.
To do this you can use a small spatula. Make
sure he unit has been previously disconnected
from the power source.
• Do not spill melted wax over the outer casing of
the unit. Handle the tools with caution.
TECHNICAL SPECIFICATIONS
Voltage:
AC 220~240 V
Frequency:
50/60 Hz
Fuse:
2 A
Power:
100 W
Height:
89 mm
Width:
91 mm
Depth:
209 mm
Weight:
530 gr
Español
7
Tabla de contenido
