Maintenance And Cleaning; Technical Specifications - Mestra R-100126 Guia De Incio Rapido

• After about 10 minutes, the wax will be ready to be used. The pilot light (H) will turn
off once the key-point temperature has been reached.
• Keep the lid (1) closed during the periods in which you do not need to remove any
wax. You will prevent spilling the wax. Outside particles and impurities will not enter
and contaminate the wax.
• After finishing the operation disconnect the heater by turning the main switch (10) off.
Handle the heater cautiously for several minutes until it has cooled down completely.

MAINTENANCE AND CLEANING

In order to ensure a long working life and an optimal operation we strongly
recommend:
• To clean the wax remains in the tank, lid and cover periodically. To do it, you can use
a spatula. Make sure the wax heater has been previously disconnected from the
power source.
• To prevent spilling melted wax over the cover of the machine. Be cautious when
handling the spatula.

TECHNICAL SPECIFICATIONS

Voltage: 230 V, 50/60 Hz
Fuse:
Power:
Temperature:
Depth:
Width:
Height:
Weight:
2 A
60 W
50 ~ 120 ºC
122 ~ 248 ºF
140 mm
110 mm
70 mm
480 gr
English
9