Actpro 1500E Power Supply - Vanderbilt ACTpro 1520e Instrucciones De Instalación Y Funcionamiento

ACTpro 1520e/1500e Door Controller – Installation and Operating Instructions
1.5A is available to power locks and readers.
The following table should be used for calculating the power budget.
ACTpro reader (1030/1040/1050/1060)
ACTPro MIFARE reader (1030/1040/1050)
Typical Mag Lock (consult your supplier)
Example: Power budget of a typical single door read in/out installation.
Total Current Available
ACTpro Controller and Battery Recharge
ACT Reader X 2
Typical Mag Lock
Total Consumption
Spare Capacity
See also:
Technical specification on page 5
l

2.3 ACTpro 1500e power supply

The ACTpro 1500e requires an external 12V DC or 24V DC power supply. The supply should be connected
to the +12/24V DC and 0V/GND connections.
© Vanderbilt 2018 EN – 8
Installation
100mA
100mA
800mA
2000mA
500mA
200mA
800mA
1500mA
500mA
A-100440
01.02.2018